Installing the System:

  1. Connect the Access Point:
    • If using an Ethernet cable with PoE (Power over Ethernet), plug the cable into the Access Point.
    • If the Ethernet cable does not support PoE, connect the Access Point to an electrical outlet using a Power Adapter included in Your package and then plug in the Ethernet cable.
  2. Wait for 5 minutes.
  3. Check the LEDs on the Access Point:
    • If all three LEDs are blinking, the system is working properly.
  4. You can start sending dishes to the labels when you see a green icon next to the label’s number in the Send menu.:

Troubleshooting:

  • If the three LEDs are not blinking after 5 minutes, it is likely an Internet connectivity issue.
  • The Access Point requires internet access without any password or additional login steps.
  • In some cases, the MAC address of the Access Point needs to be registered by the System Administrator on the server to allow internet access without login requirements.